The Ultimate Guide to Furniture Care

Commercial furniture plays a critical role in creating a welcoming and comfortable environment for guests. Placing clean and nice-look furniture for your venues that will keep guests coming back. So commercial furniture requires regular maintenance, cleaning, and disinfecting to keep products looking great and also extending its lifespan. In addition, it is useful for stopping the spread of viruses, bacteria, and other microorganisms.

That's why today, we will look at some important tips that can be used to maintain Yumeya commercial furniture easily!

Cleaning Frame Surface

• Metal Wood Grain Products

The following daily cleaning supplies can be used for metal wood grain furniture frame surface:

---Alcohol (ethanol)

---Cleaning Agents

---Vinegar

---Soap Water

For stains, fingerprints, and dust generated during daily use, only need to use a dry cloth/wet cloth can be wiped them clean. For stains that are difficult to clean, please use a cleaning agent. You don't need to worry too much about the surface of your metal wood grain furniture fading from the use of highly concentrated cleaners. The reason behind this is that Yumeya partnered with Tiger Powder Coat, which is professionally produced metal powder. Then Yumeya metal wood grain chair is 3 times durable than the similar products in the market.

• Powder Coating Products

Some Yumeya chairs are manufactured with powder-coated aluminum frames that are also easy to clean and disinfect. Washing powder coating frame surface is similar to washing metal wood grain surface. The same cleaning guidelines for metal wood grain furniture frame surfaces apply to surface cleaning of powder-coated furniture. It is also good advice to use a sponge or soft-bristled brush and mild soapy water to clean frame surfaces and rinse with water and air dry.

• Stainless Steel Polished Furniture

To clean the surface of the stainless steel polished products, the following cleaning suppliers can be used:

---Soap Water

---Vinegar

---Lemon Juice

---Special Stainless Steel Cleaner

For dust removal, start by wiping the furniture surface with a cloth soaked in soapy water. Then, proceed by cleaning with a damp cloth.

For stain removal, wipe the furniture surface with a cloth soaked in vinegar or lemon juice. Once the solution is applied to the surface, clean it with a damp cloth.

For oil stain removal, a specialized stainless steel cleaner should be used to achieve the best results.

• Stainless Steel PVD products

For fingerprints and dust generated by daily use, it is preferred to wipe with a soft dry cloth. For large stains, wipe with a wet cloth with soapy water, or use a specialized stainless steel cleaner.

Cleaning Upholstery

• Vinyl

If your chair has vinyl upholstery, use a mild mixture of mild soap and warm water to dislodge the most common surface stains, and finish by rinsing thoroughly with water. If stubborn dirt remains, such as a stain embedded in the grain, use a soft brush. But do not use polishes, stain removers or solvents.

• Fabric Upholstery

It's important to lightly clean the fabric upholstery on a regular basis, keeping it looking great by vacuuming and wiping it down with a damp cloth. Remove spillages promptly with an absorbent dry cloth, and use liquid soap with warm water for soiling. Fabrics can be cleaned using any commercially available fabric cleaner. However, always test on a hidden area of fabric first to check colour-fastness.

Important: Care needs to be taken not to use cleaning techniques that may cause the fabric to fade.

Precautions When Cleaning

l Understand the mill’s recommended cleaning guidelines and educate your designated staff accordingly.

l Use commercial-grade solvents with caution, as most powerful chemicals may end up damaging your fabric.

l Always check the upholstery label and test cleaning products on a small area before using it throughout the chair.

Yumeya Metal Wood Grain Chairs - The Ideal Solution for Commercial Spaces

When choosing chair for hotels, restaurant and others that you run, I suggest you take a look at the Yumeya metal wood grain chair. Our metal wood grain chair combines the warmth of solid wood with the strength of metal, making it an ideal piece for commercial places. It is also antimicrobial and easy to clean, which is essential to prevent the spread of fungus. The non-porous aluminum surface of metal wood grain furniture makes it difficult for pathogens to penetrate and can be easily cleaned with standard disinfectants.

 Since 2017, Yumeya start the cooperation with Tiger Powder Coat, a world famous powder. It is 3 time durable than similiar products in the market. Therefore, even if a high concentration disinfectant is used, Yumeya Metal wood grain chair will not change color. Combinned with effective cleaning programs, it can effectively prevent the spread of bacteria and viruses.

In addition, we understand that germs and debris tend to accumulate quickly because of the amount of traffic experienced in commercial spaces, you may want to consider choosing fabrics that are easy to keep clean and sanitized, thereby reducing the amount of maintenance required. At Yumeya, our chair fabrics are thoughtfully chosen as well as experimentally proven to resist mold and bacteria, ensuring a healthier and safer atmosphere for your patrons and staff. 

Antibacterial test results report：