Hotel Banquet Furniture Affects the External Factors of Solid Wood Dining Tables and Chairs
Solid wood furniture is pure solid wood furniture. It is made of no artboards without the natural wood that has not been processed again. The natural texture gives solid wood furniture a different beauty, and it is also loved by people. For example, solid wood -type hotel tables, sofas, solid wood chairs, etc., are widely used in mid -to -high -end hotel furniture. Let's take a look at the external factors that affect the quality of solid wood furniture.
temperature
Temperature is the main factor affecting the drying speed of wood. The temperature rises, the pressure in the wood in the wood is increased, and the viscosity of the liquid free water is conducive to promoting the flow and diffusion of water in the wood; the drying capacity of the drying medium of copper wire is increased, and the evaporation speed of the surface water surface is accelerated. However, it is worth noting that if the temperature is too high, it will cause the cracked and deformation of the wood, reduce the intensity of mechanical strength, and change color. It should be properly controlled. The impact of the temperature environment in the hotel on the hotel table is a factor.
humidity
Relative humidity is an important factor that affects the drying speed of wood. With the same temperature as the air flow speed, the higher the relative humidity, the larger the water vapor pressure in the medium, the less water the surface of the wood surface is evaporated in the medium, the slower the drying speed; when the relative humidity is low, the surface water evaporates fast, and the surface water evaporates fast, and the surface water evaporates fast. The surface layer is reduced, the gradient of the moisture content increases, the water diffusion is increased, and the drying speed is fast. However, the relative humidity is too low, which will cause the problem of cracked wood dining tables and dry defects such as honeycomb dining tables or even worsening.
Elite cycle speed
The air circulation speed is another factor that affects the drying speed of wood. High -speed airflow can destroy the saturated steam industry on the surface of the wood, thereby improving the heat transfer and mass transmission conditions between the medium and the wood, and speed up the drying speed. When the water content of difficult materials or wood is low, the moving water inside the wood determines the drying speed; it has no practical significance to accelerate the evaporation speed of surface moisture by increasing the high media flow rate. Instead, it will increase the gradient Danger of defects. Therefore, it does not require a large medium cycle speed.
The above three factors are external factors that can be manually controlled, and should be controlled properly, which can accelerate the drying speed on the premise of ensuring the dryness of the wood. For example, when the hotel dining table is dry or soft -leaf material, it is easier to move the temperature of the dry ball, reduce the humidity of the medium, and increase the airflow circulation rate to speed up the drying speed because the internal water inside the wood is easier to speed up; however When thick plates, lower temperature, higher humidity and smaller air circulation speed should be used to avoid dry defects.
