Hotel Banquet Chair-hotel Suite Furniture Color Precautions

Different hotel suite furniture, the surface materials are different. For example, the legs of the table, chair, and cabinet are required to use hard mixed wood, which is relatively strong and can be load -bearing, while internal materials can be used in other materials; it is found that the wood has insect eyes and foam, indicating that the drying is incomplete. Hotel furniture is not only time -consuming but also labor -intensive, but it is the key to whether the renovation can be successful. Plastic paint is just a preparation of coloring. Perhaps you spend more time on this step than in the renovation phase of other hotel furniture, but the final result will tell you that this is worth it.

It is a big project to color hotel suite furniture. As long as it is a little careless, this set of hotel furniture may be ruined. I hope this article can give you a peace of mind. In the following parts, the hotel banquet chair will lead you to understand the entire process of coloring, polish, coloring and back cover. Let's start with some issues you need to figure out before coloring.

However, no matter how strong the durability is, the furniture has a service life. In order to extend the period of use, we must learn to care for them. Guangdong Hotel Furniture suggests that furniture furniture away from the heat source or air -conditioning air outlet to avoid huge temperature differences that cause the furniture to damage or aging prematurely; at the same time, you can adjust the placement of the furniture to avoid direct sunlight. ; Solid wood drawers and sliding doors may be difficult to open and close due to excessive expansion. You can apply wax or paraffin cement foaming technology on the drawer, the edge of the door and the bottom slider.

After peeling the lacquer layer, check whether the hotel's furniture has surface and structural problems such as burning, stains, cracks, or loose plywood. Second, check the wood itself. What kind of wood is it? Is its texture tight or loose? Preparation depends on the material texture of the wooden texture and loose wood often requires some fillers; some wood also needs to be specially treated. Is this hotel furniture co -made by a variety of wood? If so, then you must first bleach or color for those less conspicuous wood (usually cheaper) to make it match the surface of the main body.

Then, then, then

Before preparing for a set of hotel furniture, it is very familiar to the characteristics and requirements of the coloring agent used. Read the ingredients and use information on the packaging tank, and use it in accordance with the manufacturer's instructions and suggestions. Make sure that the primer and fillers you use are compatible products designated by the manufacturer and listed in the attached table. For any hotel furniture, the choice of coherent determines how to prepare before coloring the wood. Not all facial paint can be used with all primer and fillers. Different coatings need to be prepared to different degrees.

In the summer season, for the owners who have stayed in, hotel furniture needs to be carried out. For owners who are preparing to decorate in the summer temperature and high humidity, pollution will increase. How to maintain stainless steel chain fabrics and avoid summer decoration pollution during the summer of summer, experts have given some useful suggestions. When most brand sofas are treated with wood, they will first treat water content. According to professionals, many furniture uses solid wood in the stress part, and other parts use high -density boards to prevent seasonal thermal expansion and contraction. Even if the humidity of summer is relatively rising, the wood will only expand slightly, and these natural changes will not affect the durability of high -quality hotel furniture.

Hotel banquet furniture, hotel banquet chair, banquet chair, hotel furniture supporting, banquet furniture