5 Core Steps To Get A Perfect Metal Wood GrainBased on metal wood grain production process, there are 5 core steps to get a perfect metal wood grain chair.
1）Fine polishing
Doing surface treatment in a chair, similar to make-up, first of all must have a smooth frame. All Yumeya chairs need to go through four polishing processes before they can formally enter the surface treatment process.Component polishing --- Polishing after welding --- Fine polish for the whole chair--- Polishing after cleaning. After 4 steps, it can achieve good flat and smooth effect.
2）Good powder coat can effectively develop color
Since 2017, Yumeya cooperate with TigerR Powder Coat for metal powder coat.It can fully display the wood grain texture, increase the fidelity, and provide 5 times of wear resistance.
3）Fine cut, perfect fit
Yumeya is the only factory realized one chair one mold. All the wood grain paper is cut out by the mold that matches the chair.
Therefore, all the wood grain paper can be effectively matched with the chair without any joint or gap.
4）Full contact, ensure the effect of heat transfer
Metal wood grain is heat transfer technology. Therefore, full contact is a key factor. We use high temperature toughness plastic mold to ensure the wood grain paper and the powder full contact to achieve a clear effect.
5）Precise temperature and time control
Time and temperature are a subtle combination. Any change in parameters will affect the overall effect, or not wear-resistant, or color different. After years of exploration, Yumeya has found the best combination of time and temperature to ensure the best wood grain effect.
